Flat Veneer Panels
Rulon manufactures Veneered Panels in several configurations which provide design solutions for architectural ceilings and walls.
A variety of wood veneers, both domestic and exotic, give the architect virtually unlimited design freedom. Our manufacturing expertise allows us to provide either flat or curved panels, finished with a factory-applied clear or custom stain finish.
Purchase This Product
Standard Finishes
Finish Notes
Finish Notes
Custom stains, clear sealers, or color treatments are spray applied using state-of-the-art finishing equipment. Rulon can custom match any color selected by the designer, architect, or owners representative.
* When using Maple (solid or veneer), the following stains are not available: Nutmeg, Ameretto, Chocolat, Cinnamon.
Above Ceiling Access
Access above Flat Veneered Panel ceilings is easily achieved with a variety of installation techniques. C-Hangers and Torsion Springs are the two most common installation methods for individual panel accessibility.
Lighting Fixtures
Light holes and other penetrations can be factory cut on Rulon’s advanced CNC manufacturing equipment. Penetrations can also be field cut by the contractor during installation.
Installation
Installation of Rulon Flat Veneered Panels varies depending on project requirements. Accessible panels are most commonly installed with Z-hangers, z-clips, or torsion springs. C-hangers simply screw to the backs of the panels and suspend the panels from standard 1/2″ wide C-channel. Torsion springs are fastened to the backs of the panels and using standard T-rail grid and a spring and clip mechanism. Panels in areas where accessibility is not required can be direct screwed to T-rail grid on the back of the panel. For wall applications, Z-clips provide a secure attachment to furring or a ply board wall.
Access above Flat Veneered Panel ceilings is easily achieved with a variety of installation techniques. C-Hangers and Torsion Springs are the two most common installation methods for individual panel accessibility.
Lighting Fixtures
Light holes and other penetrations can be factory cut on Rulon’s advanced CNC manufacturing equipment. Penetrations can also be field cut by the contractor during installation.
Installation
Installation of Rulon Flat Veneered Panels varies depending on project requirements. Accessible panels are most commonly installed with Z-hangers, z-clips, or torsion springs. C-hangers simply screw to the backs of the panels and suspend the panels from standard 1/2″ wide C-channel. Torsion springs are fastened to the backs of the panels and using standard T-rail grid and a spring and clip mechanism. Panels in areas where accessibility is not required can be direct screwed to T-rail grid on the back of the panel. For wall applications, Z-clips provide a secure attachment to furring or a ply board wall.
